Hangzhou Winteam Scientific Instruments Co., Ltd.
Hangzhou Winteam Scientific Instruments Co., Ltd. THE MISSION OF WINTEAM IS PROVIDE BETTER STERILITY TEST PRODUCTION
Add to Cart
automatic AC220V 50Hz 250 Celsius car license plate hot stamping machine
A machine that uses hot stamping to quickly, accurately and uniformly color embossed license plates. The machine uses fading foils of various colors to coat the embossed design.
The new technology solution implemented in this machine reduces its power consumption. Because of this, the stamping machine is an efficient machine of its kind on the market.
Technical characteristics
Hot stamping technology has the following advantages over traditional mime printing processes:
· No need for mime printing and drying process, saving more intermediate costs;
·High production efficiency and the purpose of fast card issuance;
·The hot stamping process has no organic solvent discharge, and it is environmentally friendly and safe;
· Better transport safety and storage stability than ink;
· The patterned hot stamping film is anti-counterfeiting.
Parameter
| Power supply | Single phase AC220V 50Hz |
| Heating power | 2400W |
| Glue roll motor power | 90W |
| Recycling file motor power | 10W |
| Max wide | 170mm |
| Hot stamping temperature | 170℃～240℃ |
| Hot stamping gap Precision | 0.01mm |
| Conveyor belt speed | 1.8m/min |
| Preheat time | ≤40min |
| Glue roll working time | 2000h |
| NET size(L*W*H) | 870*435*525mm |
| NET weight | 160Kg |
| weight with packing | 200Kg |
| noise | ＜70DdB |
License plate hot stamping effect requirements:
Blot appearance:
After hot stamping, the characters transferred to the surface of the number plate and the border of the border should be neat and burr-free. The surface of the imprinted surface should be uniform in color, and there should be no obvious defects such as peeling, curling, wrinkles, grain impurities and missing printing.
Adhesion performance:
After the hot stamping, the metal material plate is peeled off with an adhesive tape, and the print should not be detached or warped.
Sand resistance performance:
The metal material plate after hot stamping should be able to withstand wind and sand, and the surface should not be damaged, sunken, peeled off, faded and other defects.